Spine Labels, Sheets (Print Templates)

Sierra print templates are able to print to sheets of labels on a laser printer.

Table of Contents

Template

Printing to a sheet of labels requires a print template designed for this purpose. There is a template on the server called Sheet1 that will work for an 8.5x11 sheet with 4 labels across and 20 down. That template can be copied and modified to create a template for a different sheet setup. Information on setting customizing a template is here

https://marmot-support.atlassian.net/l/cp/0BtupK1i

Top of page

Queuing labels

To print onto a sheet, you have to add the call number to a queue that you will print after you get a whole sheet of numbers ready to print.

Managing the queue can only be done with an item record open.

From the item screen pull down the Tools menu, select Queue Spine Labels to Print. Then you can select one of 9 separate queues available to add this call number too.

Open

Top of page

Printing a queue

To print a call number queue you have to have an item record open. Pull down the Tools menu. Select View Spine Label Queues.

Open

Once you have some labels queued up the view looks like this:

From here you can get a print preview

If you have already used some of the labels on the sheet, you can set a number of labels to leave blank

Six blank labels would come out like this:

Click Print to actually sent the labels to the printer

Select the right printer, and click Print again on this window

Check that the labels came out correctly, if so you can clear the queue here

Top of page

Related Documentation