...
Now to reassemble. Start by turning the drive cage back over and lining up the tabs with their corresponding notches in the frame, then lay the drive cage back into place. Be aware that the wires can get in the way of the latch, and will prevent the drive cage from being positioned properly to lock back into place.
...
Next we’ll , put the face back on. Note that there are 3 tabs on the bottom-inside edge of the face. These have to be lined up with their corresponding holes along the bottom-front of the frame, then the face piece levered up against the frame until the 3 locking tabs click back into place over the top of the frame.
...